COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 )
    Column # 3     [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 4     [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 )
    Column # 5     [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 )
    Column # 6     [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 )
    Column # 7     [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 )
    Column # 8     [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 )
    Column # 9     [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 )
    Column # 10     [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 11     [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 )
    Column # 12     [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 )
    Column # 13     [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 )
    Column # 14     [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 )
    Column # 15     [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 )

    Column # 16     [ DATE-YMD ]       Date Set = 2
    Column # 17     [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 18     [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 19     [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 20     [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 )
    Column # 21     [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 22     [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 23     [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 24     [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 25     [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 26     [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 27     [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 )
    Column # 28     [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 29     [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 )
    Column # 30     [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 )

    Column # 31     [ DATE-YMD ]       Date Set = 3
    Column # 32     [TEMP= Temperature ( C )]      ( date set 3 )
    Column # 33     [PSAL= Salinity (PSS)]      ( date set 3 )
    Column # 34     [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 )
    Column # 35     [OTHR= Oxygen (mg/L)]      ( date set 3 )
    Column # 36     [LOTH= NO3NO2 (uM)]      ( date set 3 )
    Column # 37     [LOTH= NH4 (uM)]      ( date set 3 )
    Column # 38     [LOTH= Nitrite (uM)]      ( date set 3 )
    Column # 39     [LOTH= Nitrate (uM)]      ( date set 3 )
    Column # 40     [LOTH= Phosphate (uM)]      ( date set 3 )
    Column # 41     [LOTH= Silicate (uM)]      ( date set 3 )
    Column # 42     [LOTH= Total Nitrogen (uM)]      ( date set 3 )
    Column # 43     [LOTH= Total Phosphorus (uM)]      ( date set 3 )
    Column # 44     [OTHR= Suspended Solids (mg/L)]      ( date set 3 )
    Column # 45     [LOTH= Turbidity (FTU)]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]
        Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ]

    non-Log10 (linear) Miscellaenous Category
        Column # 35   [ OTHR= Oxygen (mg/L) ]
        Column # 44   [ OTHR= Suspended Solids (mg/L) ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature ( C ) ]

    Salinities Category
        Column # 33   [ PSAL= Salinity (PSS) ]

DATA SORTED BY GROUPING SETS:

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]
        column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ]



DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1989 2012
DATES in Column 16 no problems detected 1989 2012
DATES in Column 31 no problems detected 1979 2012

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1989 2012 01 12 01 31
16 DATE-YMD DATE-YMD yes 1989 2012 01 12 01 31
31 DATE-YMD DATE-YMD yes 1979 2012 01 12 01 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ]
no problems detected 538 75.0000000 1036650.31 538
( 100 %)
538
( 100 %)
Column 3 :
[ 05_ABDT1= Total Dinophyceae (#/l) at the surface ]
no problems detected 537 20.0000000 493636.531 537
( 100 %)
537
( 100 %)
Column 4 :
[ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ]
no problems detected 506 324.132996 4197820.00 506
( 100 %)
506
( 100 %)
Column 5 :
[ 07_ABDT1= Total Litostomatea (#/l) at the surface ]
no problems detected 506 30.0000000 17892.7344 506
( 100 %)
506
( 100 %)
Column 6 :
[ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ]
no problems detected 473 20.0000000 785531.500 473
( 100 %)
473
( 100 %)
Column 7 :
[ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ]
no problems detected 212 20.0000000 44704300.0 212
( 100 %)
212
( 100 %)
Column 8 :
[ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ]
no problems detected 241 39.9990005 8269323.50 241
( 100 %)
241
( 100 %)
Column 9 :
[ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
no problems detected 458 1000.00000 12700000.0 458
( 100 %)
458
( 100 %)
Column 10 :
[ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ]
no problems detected 338 800.000000 6200000.00 338
( 100 %)
338
( 100 %)
Column 11 :
[ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ]
no problems detected 230 20.0000000 10300.0000 230
( 100 %)
230
( 100 %)
Column 12 :
[14_ABDT1= Total Nanoplankton (#/l) at the surface ]
There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!


Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 13 :
    [ 15_ABDT1= Total Raphidophyceae (#/l) at the surface ]
    no problems detected 97 80.0000000 5002960.50 97
    ( 100 %)
    97
    ( 100 %)
    Column 14 :
    [16_ABDT1= Total Spirotrichea (#/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 15 :
    [ 17_ABDT1= Total Unidentified (#/l) at the surface ]
    no problems detected 511 9784.76855 16230529.0 511
    ( 100 %)
    511
    ( 100 %)
    Column 17 :
    [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ]
    no problems detected 538 1.85000002E-02 133.264999 538
    ( 100 %)
    297
    ( 55 %)
    Column 18 :
    [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ]
    no problems detected 537 3.24999988E-02 101.968903 537
    ( 100 %)
    323
    ( 60 %)
    Column 19 :
    [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ]
    no problems detected 506 4.90000006E-03 26.4634991 506
    ( 100 %)
    147
    ( 29 %)
    Column 20 :
    [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ]
    no problems detected 506 1.00999996E-02 24.6242008 506
    ( 100 %)
    167
    ( 33 %)
    Column 21 :
    [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ]
    no problems detected 473 7.99999980E-04 47.1166992 473
    ( 100 %)
    130
    ( 27 %)
    Column 22 :
    [ 23_BIOM2= Total Chlorophyceae (ug/l) at the surface ]
    no problems detected 212 1.99999995E-04 8.68990040 212
    ( 100 %)
    13
    ( 6 %)
    Column 23 :
    [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ]
    no problems detected 241 1.99999995E-04 9.31569958 241
    ( 100 %)
    22
    ( 9 %)
    Column 24 :
    [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
    no problems detected 458 3.70000000E-03 953.916687 458
    ( 100 %)
    196
    ( 42 %)
    Column 25 :
    [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ]
    no problems detected 338 1.79999997E-03 17.2196999 338
    ( 100 %)
    23
    ( 6 %)
    Column 26 :
    [27_BIOM2= Total Euglenophyceae (ug/l) at the surface ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 230 9.99999975E-05 7.80340004 230
    ( 100 %)
    5
    ( 2 %)
    Column 27 :
    [28_BIOM2= Total Nanoplankton (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 28 :
    [ 29_BIOM2= Total Raphidophyceae (ug/l) at the surface ]
    no problems detected 97 5.29999984E-03 686.084778 97
    ( 100 %)
    44
    ( 45 %)
    Column 29 :
    [30_BIOM2= Total Spirotrichea (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 30 :
    [ 31_BIOM2= Total Unidentified (ug/l) at the surface ]
    no problems detected 511 4.72000018E-02 33.6189003 511
    ( 100 %)
    242
    ( 47 %)
    Column 32 :
    [ 32_TEMP= Temperature ( C ) ]
    no problems detected 1182 -0.873300016 19.2933006 1177
    ( 99 %)
    1153
    ( 97 %)
    Column 33 :
    [ 33_PSAL= Salinity (PSS) ]
    no problems detected 1177 14.9333000 30.6168995 1177
    ( 100 %)
    1177
    ( 100 %)
    Column 34 :
    [ 34_CHLA= Chlorophyll-a (ug/L) ]
    no problems detected 622 0.300000012 174.000000 622
    ( 100 %)
    509
    ( 81 %)
    Column 35 :
    [ 35_OTHR= Oxygen (mg/L) ]
    no problems detected 1179 4.22499990 17.1000004 1179
    ( 100 %)
    1179
    ( 100 %)
    Column 36 :
    [ 36_LOTH= NO3NO2 (uM) ]
    no problems detected 620 0.107100002 20.7143002 620
    ( 100 %)
    218
    ( 35 %)
    Column 37 :
    [ 37_LOTH= NH4 (uM) ]
    no problems detected 617 7.14000016E-02 4.64289999 617
    ( 100 %)
    102
    ( 16 %)
    Column 38 :
    [38_LOTH= Nitrite (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 39 :
    [39_LOTH= Nitrate (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 40 :
    [ 40_LOTH= Phosphate (uM) ]
    no problems detected 617 3.22999991E-02 1.09679997 617
    ( 100 %)
    1
    ( 0 %)
    Column 41 :
    [ 41_LOTH= Silicate (uM) ]
    no problems detected 615 7.14000016E-02 27.1429005 615
    ( 100 %)
    467
    ( 75 %)
    Column 42 :
    [ 42_LOTH= Total Nitrogen (uM) ]
    no problems detected 615 6.21430016 56.7142982 615
    ( 100 %)
    615
    ( 100 %)
    Column 43 :
    [ 43_LOTH= Total Phosphorus (uM) ]
    no problems detected 614 0.193499997 2.45160007 614
    ( 100 %)
    113
    ( 18 %)
    Column 44 :
    [44_OTHR= Suspended Solids (mg/L) ]
    There is/are 1 count WARNING(S)!
    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 20 1.50000000 30.0000000 20
    ( 100 %)
    20
    ( 100 %)
    Column 45 :
    [45_LOTH= Turbidity (FTU) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".