COPEPODITE Incoming Data Review

Fatal Format Issues:   none



HEADER REVIEW SECTION
[
Jump back to TOP ]

SEQUENTIAL ORDERING OF ACTIVE DATA COLUMNS

    Column # 1     [ DATE-YMD ]       Date Set = 1
    Column # 2     [ABDT1= Total Diatomophyceae (#/l) at the surface]      ( date set 1 )
    Column # 3     [ABDT1= Total Dinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 4     [ABDT1= Total Cryptophyceae (#/l) at the surface]      ( date set 1 )
    Column # 5     [ABDT1= Total Litostomatea (#/l) at the surface]      ( date set 1 )
    Column # 6     [ABDT1= Total Chrysophyceae (#/l) at the surface]      ( date set 1 )
    Column # 7     [ABDT1= Total Chlorophyceae (#/l) at the surface]      ( date set 1 )
    Column # 8     [ABDT1= Total Nostocophyceae (#/l) at the surface]      ( date set 1 )
    Column # 9     [ABDT1= Total Prymnesiophyceae (#/l) at the surface]      ( date set 1 )
    Column # 10     [ABDT1= Total Prasinophyceae (#/l) at the surface]      ( date set 1 )
    Column # 11     [ABDT1= Total Euglenophyceae (#/l) at the surface]      ( date set 1 )
    Column # 12     [ABDT1= Total Nanoplankton (#/l) at the surface]      ( date set 1 )
    Column # 13     [ABDT1= Total Raphidophyceae (#/l) at the surface]      ( date set 1 )
    Column # 14     [ABDT1= Total Spirotrichea (#/l) at the surface]      ( date set 1 )
    Column # 15     [ABDT1= Total Unidentified (#/l) at the surface]      ( date set 1 )

    Column # 16     [ DATE-YMD ]       Date Set = 2
    Column # 17     [BIOM2= Total Diatomophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 18     [BIOM2= Total Dinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 19     [BIOM2= Total Cryptophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 20     [BIOM2= Total Litostomatea (ug/l) at the surface]      ( date set 2 )
    Column # 21     [BIOM2= Total Chrysophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 22     [BIOM2= Total Chlorophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 23     [BIOM2= Total Nostocophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 24     [BIOM2= Total Prymnesiophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 25     [BIOM2= Total Prasinophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 26     [BIOM2= Total Euglenophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 27     [BIOM2= Total Nanoplankton (ug/l) at the surface]      ( date set 2 )
    Column # 28     [BIOM2= Total Raphidophyceae (ug/l) at the surface]      ( date set 2 )
    Column # 29     [BIOM2= Total Spirotrichea (ug/l) at the surface]      ( date set 2 )
    Column # 30     [BIOM2= Total Unidentified (ug/l) at the surface]      ( date set 2 )

    Column # 31     [ DATE-YMD ]       Date Set = 3
    Column # 32     [TEMP= Temperature ( C )]      ( date set 3 )
    Column # 33     [PSAL= Salinity (PSS)]      ( date set 3 )
    Column # 34     [CHLA= Chlorophyll-a (ug/L)]      ( date set 3 )
    Column # 35     [OTHR= Oxygen (mg/L)]      ( date set 3 )
    Column # 36     [LOTH= NO3NO2 (uM)]      ( date set 3 )
    Column # 37     [LOTH= NH4 (uM)]      ( date set 3 )
    Column # 38     [LOTH= Nitrite (uM)]      ( date set 3 )
    Column # 39     [LOTH= Nitrate (uM)]      ( date set 3 )
    Column # 40     [LOTH= Phosphate (uM)]      ( date set 3 )
    Column # 41     [LOTH= Silicate (uM)]      ( date set 3 )
    Column # 42     [LOTH= Total Nitrogen (uM)]      ( date set 3 )
    Column # 43     [LOTH= Total Phosphorus (uM)]      ( date set 3 )
    Column # 44     [OTHR= Suspended Solids (mg/L)]      ( date set 3 )
    Column # 45     [LOTH= Turbidity (FTU)]      ( date set 3 )


DATA SORTED BY CATEGORY TYPES

    Abundance (with zeros) Category
        Column # 2   [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        Column # 3   [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        Column # 4   [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        Column # 5   [ ABDT1= Total Litostomatea (#/l) at the surface ]
        Column # 6   [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        Column # 7   [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        Column # 8   [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        Column # 9   [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        Column # 10   [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        Column # 11   [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        Column # 12   [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        Column # 13   [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        Column # 14   [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        Column # 15   [ ABDT1= Total Unidentified (#/l) at the surface ]

    non-Log10 (linear) Miscellaenous Category
        Column # 35   [ OTHR= Oxygen (mg/L) ]
        Column # 44   [ OTHR= Suspended Solids (mg/L) ]

    Temperatures Category
        Column # 32   [ TEMP= Temperature ( C ) ]

    Salinities Category
        Column # 33   [ PSAL= Salinity (PSS) ]

DATA SORTED BY GROUPING SETS:

    Category 8 Group # 1
        column # 2     [ ABDT1= Total Diatomophyceae (#/l) at the surface ]
        column # 3     [ ABDT1= Total Dinophyceae (#/l) at the surface ]
        column # 4     [ ABDT1= Total Cryptophyceae (#/l) at the surface ]
        column # 5     [ ABDT1= Total Litostomatea (#/l) at the surface ]
        column # 6     [ ABDT1= Total Chrysophyceae (#/l) at the surface ]
        column # 7     [ ABDT1= Total Chlorophyceae (#/l) at the surface ]
        column # 8     [ ABDT1= Total Nostocophyceae (#/l) at the surface ]
        column # 9     [ ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
        column # 10     [ ABDT1= Total Prasinophyceae (#/l) at the surface ]
        column # 11     [ ABDT1= Total Euglenophyceae (#/l) at the surface ]
        column # 12     [ ABDT1= Total Nanoplankton (#/l) at the surface ]
        column # 13     [ ABDT1= Total Raphidophyceae (#/l) at the surface ]
        column # 14     [ ABDT1= Total Spirotrichea (#/l) at the surface ]
        column # 15     [ ABDT1= Total Unidentified (#/l) at the surface ]



DATE REVIEW SECTION
[
Jump back to TOP ]

DATE COLUMNCommentsMinimum YearMaximum Year
DATES in Column 1 no problems detected 1989 2009
DATES in Column 16 no problems detected 1989 2009
DATES in Column 31 no problems detected 1982 2012

 Date Column LabelingDate Value-Set1Date Value-Set2Date Value-Set3
DATE-column Date-Label AutoDetect match? SET1min SET1max SET2min SET2max SET3min SET3max
1 DATE-YMD DATE-YMD yes 1989 2009 01 12 01 31
16 DATE-YMD DATE-YMD yes 1989 2009 01 12 01 31
31 DATE-YMD DATE-YMD yes 1982 2012 01 12 01 31



DATA REVIEW SECTION
[
Jump back to TOP ]



DATA COLUMN Comments"n" Minimum
(non-zero)
Maximum Values
> 0
Values
> 1
Column 2 :
[ 04_ABDT1= Total Diatomophyceae (#/l) at the surface ]
no problems detected 379 60.0000000 19115650.0 379
( 100 %)
379
( 100 %)
Column 3 :
[ 05_ABDT1= Total Dinophyceae (#/l) at the surface ]
no problems detected 369 26.6667004 1455666.62 369
( 100 %)
369
( 100 %)
Column 4 :
[ 06_ABDT1= Total Cryptophyceae (#/l) at the surface ]
no problems detected 353 3600.00000 20066060.0 353
( 100 %)
353
( 100 %)
Column 5 :
[ 07_ABDT1= Total Litostomatea (#/l) at the surface ]
no problems detected 277 40.0000000 55000.0000 277
( 100 %)
277
( 100 %)
Column 6 :
[ 08_ABDT1= Total Chrysophyceae (#/l) at the surface ]
no problems detected 187 20.0000000 1323862.25 187
( 100 %)
187
( 100 %)
Column 7 :
[ 09_ABDT1= Total Chlorophyceae (#/l) at the surface ]
no problems detected 28 20.0000000 65041224.0 28
( 100 %)
28
( 100 %)
Column 8 :
[ 10_ABDT1= Total Nostocophyceae (#/l) at the surface ]
no problems detected 65 20.0000000 183400.000 65
( 100 %)
65
( 100 %)
Column 9 :
[ 11_ABDT1= Total Prymnesiophyceae (#/l) at the surface ]
no problems detected 67 1201.19897 3702841.50 67
( 100 %)
67
( 100 %)
Column 10 :
[ 12_ABDT1= Total Prasinophyceae (#/l) at the surface ]
no problems detected 112 2195.74023 2845300.00 112
( 100 %)
112
( 100 %)
Column 11 :
[ 13_ABDT1= Total Euglenophyceae (#/l) at the surface ]
no problems detected 92 20.0000000 7463000.00 92
( 100 %)
92
( 100 %)
Column 12 :
[14_ABDT1= Total Nanoplankton (#/l) at the surface ]
There is/are 3 count WARNING(S)!

All/most of your values are EMPTY (missing).
This variable will be ignored!


Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 13 :
    [ 15_ABDT1= Total Raphidophyceae (#/l) at the surface ]
    no problems detected 26 200.000000 666318.625 26
    ( 100 %)
    26
    ( 100 %)
    Column 14 :
    [16_ABDT1= Total Spirotrichea (#/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 15 :
    [ 17_ABDT1= Total Unidentified (#/l) at the surface ]
    no problems detected 386 23750.0000 11963150.0 386
    ( 100 %)
    386
    ( 100 %)
    Column 17 :
    [ 18_BIOM2= Total Diatomophyceae (ug/l) at the surface ]
    no problems detected 379 4.60000010E-03 363.574188 379
    ( 100 %)
    273
    ( 72 %)
    Column 18 :
    [ 19_BIOM2= Total Dinophyceae (ug/l) at the surface ]
    no problems detected 369 7.10000005E-03 298.302490 369
    ( 100 %)
    265
    ( 71 %)
    Column 19 :
    [ 20_BIOM2= Total Cryptophyceae (ug/l) at the surface ]
    no problems detected 352 2.23999992E-02 32.5821991 352
    ( 100 %)
    138
    ( 39 %)
    Column 20 :
    [ 21_BIOM2= Total Litostomatea (ug/l) at the surface ]
    no problems detected 277 1.10999998E-02 110.090698 277
    ( 100 %)
    125
    ( 45 %)
    Column 21 :
    [ 22_BIOM2= Total Chrysophyceae (ug/l) at the surface ]
    no problems detected 186 9.20000020E-03 91.6751022 186
    ( 100 %)
    54
    ( 29 %)
    Column 22 :
    [23_BIOM2= Total Chlorophyceae (ug/l) at the surface ]
    There is/are 1 count WARNING(S)!

    Some of your values are zero or "one".

    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 24 1.59999996E-03 9.59140015 24
    ( 100 %)
    4
    ( 16 %)
    Column 23 :
    [ 24_BIOM2= Total Nostocophyceae (ug/l) at the surface ]
    no problems detected 65 2.19999999E-03 6.76370001 65
    ( 100 %)
    6
    ( 9 %)
    Column 24 :
    [ 25_BIOM2= Total Prymnesiophyceae (ug/l) at the surface ]
    no problems detected 67 1.31999999E-02 21.4692001 67
    ( 100 %)
    35
    ( 52 %)
    Column 25 :
    [ 26_BIOM2= Total Prasinophyceae (ug/l) at the surface ]
    no problems detected 112 1.53999999E-02 36.8578987 112
    ( 100 %)
    47
    ( 41 %)
    Column 26 :
    [ 27_BIOM2= Total Euglenophyceae (ug/l) at the surface ]
    no problems detected 90 6.99999975E-04 1595.58936 90
    ( 100 %)
    26
    ( 28 %)
    Column 27 :
    [28_BIOM2= Total Nanoplankton (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 28 :
    [ 29_BIOM2= Total Raphidophyceae (ug/l) at the surface ]
    no problems detected 26 1.70000009E-02 44.4294014 26
    ( 100 %)
    12
    ( 46 %)
    Column 29 :
    [30_BIOM2= Total Spirotrichea (ug/l) at the surface ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 30 :
    [ 31_BIOM2= Total Unidentified (ug/l) at the surface ]
    no problems detected 385 0.148599997 72.5842972 385
    ( 100 %)
    332
    ( 86 %)
    Column 32 :
    [ 32_TEMP= Temperature ( C ) ]
    no problems detected 590 -0.900600016 23.4468994 580
    ( 98 %)
    571
    ( 96 %)
    Column 33 :
    [ 33_PSAL= Salinity (PSS) ]
    no problems detected 590 12.8916998 30.9386997 590
    ( 100 %)
    590
    ( 100 %)
    Column 34 :
    [ 34_CHLA= Chlorophyll-a (ug/L) ]
    no problems detected 523 0.224000007 90.0000000 523
    ( 100 %)
    453
    ( 86 %)
    Column 35 :
    [ 35_OTHR= Oxygen (mg/L) ]
    no problems detected 579 3.04850006 23.3418999 579
    ( 100 %)
    579
    ( 100 %)
    Column 36 :
    [ 36_LOTH= NO3NO2 (uM) ]
    no problems detected 550 0.107100002 80.4356995 550
    ( 100 %)
    292
    ( 53 %)
    Column 37 :
    [ 37_LOTH= NH4 (uM) ]
    no problems detected 87 0.214300007 10.7143002 87
    ( 100 %)
    31
    ( 35 %)
    Column 38 :
    [38_LOTH= Nitrite (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 39 :
    [39_LOTH= Nitrate (uM) ]
    There is/are 1 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 40 :
    [ 40_LOTH= Phosphate (uM) ]
    no problems detected 536 3.22999991E-02 5.16130018 536
    ( 100 %)
    99
    ( 18 %)
    Column 41 :
    [ 41_LOTH= Silicate (uM) ]
    no problems detected 533 7.14000016E-02 233.928604 532
    ( 99 %)
    518
    ( 97 %)
    Column 42 :
    [ 42_LOTH= Total Nitrogen (uM) ]
    no problems detected 551 7.85710001 171.428604 551
    ( 100 %)
    551
    ( 100 %)
    Column 43 :
    [ 43_LOTH= Total Phosphorus (uM) ]
    no problems detected 536 0.128999993 7.41940022 536
    ( 100 %)
    356
    ( 66 %)
    Column 44 :
    [44_OTHR= Suspended Solids (mg/L) ]
    There is/are 3 count WARNING(S)!

    All/most of your values are EMPTY (missing).
    This variable will be ignored!


    Possible warning triggers:
  • a non-numeric value was encountered!
  • text comments like "null" or "n/a" will be ignored.
  • Engineering units ("1.25E5", "1.25 x 10^5")

  • 0 9999999.00 -9999999.00 0
    ( -2147483648 %)
    0
    ( -2147483648 %)
    Column 45 :
    [ 45_LOTH= Turbidity (FTU) ]
    no problems detected 274 5.87500000 3132.72217 274
    ( 100 %)
    274
    ( 100 %)

    The "Values >0" and "Values >1" columns look for data cases in which data values are heavily counts of "zero" or "1".